This board is designed for those who do not need the signal routing of the Patch Pad™ and gives more space to pedals.

The two-tier stair step design allows for modular pads that adjust to fit longer pedals like Wah and Volume.

Rugged, lightweight design protects your pedals during transport while making carrying easier.

Pedal Pad™ MPS-9 Dimensions:

• Length: 28"
• Depth: 15"
• Height: w/ lid 8"; w/o lid 6"

This power supply cycles so far above the range of human hearing that ripple-based buzz (60 cycle hum) is eliminated. At 1.67 amps of current, Power Pad II will deliver 9 volts every time and can power an unlimited number of pedals. AC and DC power is circuit protected. Includes an AC courtesy outlet which solves the problem of different voltages and reversed polarities, Eight 2.1MM 9VDC outputs and cords and an IEC inlet with 10’ AC power cable. You can also daisy chain additional pedals using a daisy chain connector (not included) and connecting it to one of the 8 outputs.

International Voltage Users: The Power Pad II runs on standard U.S. 110 voltage. You can plug any voltage in the world into it such as 240/220, etc. However, whatever input voltage you plug into the Power Pad II is the same voltage that will come out of the AC courtesy outlet on the side. For example, if you want to plug a pedal that requires a dedicated adapter into the courtesy outlet, you would probably need some type of (i.e. 220/240 volt) converter for the courtesy outlet. In addition, the (8) 9 volt DC jacks will still put out the same 9 volts to each pedal, no matter what voltage you put into the main power supply unit.