• User replaceable assignable ALPs™ crossfader
• 5-band graphic equalizer with In/Out switch
• Master and Booth level controls
• Neutrik™ “Combo” connector allows 1/4” or XLR plug to be used for DJ Mic
• Dedicated DJ Mic and Second Mic Channel with 2 Band EQ and Talk-over dual control
• Split cue headphone monitoring with cross-fader
• Stereo/Mono switch on the Master
• Tape Out for direct recording.
• Powerful stereo headphone output
• Push button cueing
• High-end performance audio signal
• 12V BNC light connector

SPECIFICATIONS

INPUTS:

Line:    10kW input impedance
           80 mV rms sensitivity (for 1.22 V output)

Mic:     10kW input impedance balanced/unbalanced
            2.5 mV rms sensitivity (for 1.22 V output)
            500 mV rms max input

Phono:  47kW input impedance
            1.5 mV rms sensitivity @ 1 KHz (for 1.22 V output)

OUTPUTS:

Line: 9V rms max (+20 dBm)
Headphone Amp: .5 watt into 47W
Distortion less than .01%

EQUALIZER:

5-Band Stereo Graphic EQ
Band centers 63Hz, 250Hz, 1KHz, 4KHz, 16KHz +/- 12 dB

SIGNAL TO NOISE RATIOS (vs. maximum output):

Line: Better than 85 dB
Mic: Better than 72 dB
Phono: Better than 83 dB

FREQUENCY RESPONSE:

Mic: 20 Hz- 15k Hz +_ .5 dB
Line: 20 Hz- 20k Hz +_ .5 dB
Phono: +_ 1 dB except for controlled attenuation of -3 dB
           @ 20 Hz to reduce rumble and feedback

TALKOVER ATTENUATION:

variable from no cut to -16 dB

POWER CONSUMPTION:

20 Watt typical, 28 Watt with full headphone output