|
Truly two
pickups in one; single and dual-coil with two separate outputs. With
the single flip of a switch you can change from the crunch of a
humbucker to the clarity of a single-coil. Using alnico magnets, the
single-coil mode is like that of the EMG-SA,
and the humbucking is patterned after the EMG-85.
The tone modes can be selected with the included push-pull volume
control switch or with a mini-toggle.
The EMG-89
Dual Mode Pickup has been through two generations. The original
Dual-mode (EMG-DM) design was incredibly sophisticated for its time
(1979). The DM was an 18-Volt model with a single output available
only in an Alnico magnet version. The EMG-DM was abandoned in late
1985, but the concept was revived early in 1989 when EMG came upon a
more innovative design featuring "two pickups in one", the
current EMG-89.
Inside the
EMG-89 pickup are both single and dual-coil pickups, each with it's
own output. The single-coil mode is an Alnico loaded stacked EMG-SA.
The dual-coil mode consists of two Alnico loaded coils opposite one
another creating a pickup similar to the EMG-85. The push/pull volume
(or tone) pot allows you to change from the clarity of a single-coil
to the fatness of a humbucking. The EMG-89's separate outputs give
you option to utilize EMG tone enhancing accessory circuits on
either pickup output.
Virtually noiseless in both
modes, it can also be used with several EMG accessories such as the EMG-SPC, EMG-EXG
expander, or the PA2 preamp booster.
Product
Data Sheet (pdf Download)
|
SPECIFICATIONS:
The EMG Model 89 is a Dual Mode pickup. It can be
switched from a single coil pickup to a humbucking pickup
| Logo
Color: |
Copper |
| Output
Impedance (Kohm) |
10 |
| Current
@ 9V (Microamps) |
160 |
| Battery
Life (Hours) |
1500 |
| |
|
|
Single
Coil |
Humbucker |
| Resonant Frequency (kHz) |
3.75 |
2.55 |
| RMS Output Voltage |
0.6 |
1.0 |
| Peak
Output Voltage |
0.85 |
1.75 |
| Output
Noise (dBv) |
-94 |
-99 |
|
|