Crate V1512T 15 Watts All Tube Amplifier with 12" Tone Tubby Speaker

248 Rock Hill Drive, P.O. Box 760
Rock Hill, NY 12775
Phone/Fax 845-796-3616

Crate V-Series V1512T
12" 15 Watts - All Tube
with Tone Tubby™ Speaker

Crate V-Series V1512

The V1512T is designed for rehearsal/recording. It has an internal spring reverb for a huge, wet sound from its single Tone Tubby 12" hemp cone speaker. Tone Tubby speakers are becoming an underground phenomenon because of their incredible warmth and clarity. They are extremely efficient.

The V-Series all-tube amplifiers feature intuitive and powerful features, all tube hot-rodded performance, and a totally unique look. All of the V-Series models are designed and manufactured in the United States, using only the finest materials and processes. They come with a full 5-year Warranty on Electronics and 2 years on speakers.

$499.99
Includes UPS Ground Shipping
in Continental U.S.
HOLD - Not available

Features:
•	Tone Tubby 12" Speaker
•	15 Watts - All Tube
•	Class A Design
•	Three 12AX7A Preamp Tubes
•	Two EL84 Power Tubes
•	Groove Tubes
•	External Speaker Jack
•	16 ohms
•	Spring Reverb
•	16.5" x 18.25" x 9.5"
•	38 lbs.
Specifications subject to change without notice

Input: Connect your instrument here by means of a shielded signal cable.
Gain: Use this control to adjust the input gain. With the control towards the counter clockwise position, the gain is low and very little distortion is present. As you rotate the control clockwise the gain increases, producing more overdrive distortion and a higher output volume level.
Boost: This switch, when depressed, increases the output of the frequencies below 500Hz, giving the bottom end more punch.
Treble: Use this control to adjust the output level of the high frequencies. This control provides 8dB of cut or boost at 10kHz.
Mid: Use this control to adjust the output level of the middle frequencies. This control provides 9dB of cut or boost at 700Hz.
Bass: Use this control to adjust the output level of the low frequencies. This control provides 12dB of cut or boost at 60Hz.
Level: Use this control to adjust the output level of Channel B.
Reverb: Use this control to adjust the amount of reverberation applied to the signal. With the control fully counter clockwise no reverb is applied. As you rotate the control clockwise the reverb increases.
Lamp: This lamp illuminates when the amplifier is turned on.
On/Off Switch: Use this switch to turn the amplifier on and off.

Prices quoted are subject to change. Quantities are limited on some items.
Please contact us before ordering to verify availability and shipping information
Questions? Call or e-mail us at steve@stevesmusiccenter.com. Click HERE for Return Policy.