Crate
SM1SP Studio Module
$149.99 |
| Front and Back Panels |

1: Status LED:
Lights when the unit is on and functioning properly.
2: Signal LED:
Lights when the input signal is within 20dB of the maximum input level.
3: Peak LED:
Lights when the input signal is within 6dB of clipping.
4: Input Level
Control: Allows adjustment of the level of the signal going into the
processor. For the best signal to noise ratio, adjust this control until
the Peak LED flashes on strong signal peaks.
5: Mix Control:
Allows variation of the amount of effect applied to the overall audio
output. Adjust to taste.
6: Output Level
Control: Allows adjustment of the audio level coming out from the
processor. Use this as your master volume control.
7: Select Control:
Allows selection of effects.
8: Adjust Control:
Allows changes to be made on one parameter of the selected effect. These
changes remain active until another effect is selected.

9: Power Supply
Jack: Plug the small metal barrel connector of the AC power adapter
here.
10: Cord Cinch:
Use this clip to secure the cable of the power pack to the chassis of
the unit.
11: Output Jacks:
These jacks carry the left and right output signals from the unit to
their destinations.
12: Input Jacks:
These jacks receive the input signal(s) into the unit.
Prices quoted are subject to
change. Quantities are limited on some items.
If you plan to order more than one of any item, please contact us before ordering to verify availability.
Click HERE for Return Policy. Questions? Call or e-mail steve@stevesmusiccenter.com.
HOME/SEARCH | acoustic guitars | amps | audio | basses | drums | effects a-f | effects g-z | electric guitars | guitar accessories
guitar tuners | harmonicas | mandolins / banjos | pickups | map/directions | meet Steve | e-mail Steve |
review cart