Crate BT15 Bass Amplifier

248 Rock Hill Drive, P.O. Box 760
Rock Hill, NY 12775
Phone/Fax 845-796-3616

Crate BT15

The BT15 features four bands of equalization, an external speaker jack and a jack for

headphones.

Player Type: This is the perfect first bass amp, home practice or home studio amp.

Features:
Output Power Rating:	12 watts RMS @ 5% THD, 4 ohms 120 VAC
Maximum Signal Accepted:	15 volts peak to peak
Input Impedance:	25k ohms
Signal to Noise:	72dB
EQs:	Low 15dB range @ 50Hz; Low Mid 12dB range @ 250Hz; High Mid 13dB range @ 1kHz; High 24dB range @ 10kHz
Speaker Size and Rating:	(1) Crate Custom Design 8", 15 watts
Input Power Requirements:	120VAC, 60Hz, 30VA; 110/115VAC, 50/60Hz, 30VA; 230VAC, 50/60Hz, 30VA
Size and Weight:	14.5"H x 15"W x 9.5"D, 21 lbs

Crate BT15 Control Panel

1.	INPUT: Connect your bass here by means of a shielded instrument cable.
2.	GAIN Use this control to adjust the overall output level of the amp.
3.	Low Use this control to adjust the low frequency output level. Rotating the control counterclockwise reduces the low frequency output, rotating the control clockwise increases it.
4.	Low Mid Use this control to adjust the lower midrange frequency output level. Rotating the control counter clockwise reduces the lower midrange frequency output, rotating the control clockwise increases it..
5.	High Mid Use this control to adjust the upper midrange frequency output level. Rotating the control counter clockwise reduces the upper midrange frequency output, rotating the control clockwise increases it..
6.	High Use this control to adjust the high frequency output level. Rotating the control counter clockwise reduces the high frequency output, rotating the control clockwise increases it.
7.	CD INPUT Use these RCA jacks to connect the output from a CD player or tape deck to the amplifier. The signal at these jacks is combined into a mono signal which is sent to the internal power amp circuit. Use the CD or tape player’s output level control to adjust the signal for the proper mix with your bass.
8.	External Speaker Use this jack to connect the amplifier to an external speaker cabinet. The internal speaker is disconnected when this jack is used.
9.	HEADPHONES Use this jack to connect a pair of stereo headphones for private listening The internal speaker is disconnected when this jack is used.
10.	POWER 'ON' INDICATOR LED This LED illuminates when the amplifier is on.
11.	POWER Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed).
12.	POWER CORD (rear panel, not shown): The grounded power cord should only be plugged into a grounded outlet that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stated on the rear label. DO NOT attempt to defeat the safety ground connection.

Prices quoted are subject to change. Quantities are limited on some items.
If you plan to order more than one of any item, please contact us before ordering to verify availability.
Click HERE for Return Policy. Questions? Call or e-mail steve@stevesmusiccenter.com.