Blackheart BH100H Hothead

248 Rock Hill Drive, P.O. Box 760
Rock Hill, NY 12775
Phone/Fax 845-796-3616

Blackheart BH100H Hothead
100-Watt All-Tube Head. 100 Watts, Class A or Class AB Operation

Talk about corruptive power. The Blackheart Engineering Hothead takes the basic plug and play attitude of a world-class 100-watt workhorse head and puts just enough thoughtful features on it to be the most flexible amp in its class, not to mention several classes up. Two Power Modes (Class AB and Class A) divisible by Pentode (full power) and Triode (half power) operation put four unique, classic and powerful voices right at your fingertips and you won't need a Ph.D to get amazing tone; whether it's searing rock your face off at full volume riff work or plucky, responsive Class A blues when you're felling all deep and stuff.

Awesome Power, Awesome Flexibility

Two simple switches open up an endless world of tonal possibilities.

Class AB/Pentode: 100W of flesh searing power
Class AB/Triode: 50W, tighter headroom, crisper gain, still hurts
Class A/Pentode: 60W, lots of headroom before overdrive, nice and plucky
Class A/Triode: 30W, less headroom, more responsive to your attack

All this before you dial in a brilliantly tuned EQ section and reign it all in through the Master Volume and Master Presence controls.

Two-Channels, Separate EQs: The Hothead has two channels (Loud and F'N Loud), each selectable by a mini toggle on the faceplate or remotely via the included footswitch and each voiced through its own, dedicated EQ section. No more switching from one sound to the same sound in the middle of your jam. Dial in two distinct voices and rock on.

The LOUD Channel (aka "One") is voiced to range from Crisp Cleans to Classic Rock and Heavy Blues tones.
- Controls: Drive, Level, Treble, Middle, Bass
The F'N LOUD Channel (aka "Two") is voiced to capture Classic Crunch to Sweet Overdriven Lead tones.
- Controls: Gain, Level, Treble, Middle, Bass

Tube Effects Loop/Boost Function with Level Control

Both channels share a Tube Driven Effects Loop that can be run in series or parallel modes (selectable by mini toggle on the amp's rear panel) and then hard bypassed, doubling as a footswitch-activated boost. Send and Return controls act as expected when in Effects loop Mode but allow you to tweak your Boost Volume when your effects are hard bypassed. Admit it...that's cool.

SPECS:

» 100 Watts, Class A or Class AB Operation » Pentode/Triode Switch » Power Output: Class AB – 100 Watts RMS in (Full Power) Pentode Mode, 50 Watts RMS in (Half Power) Triode Mode, Class A – 60 Watts RMS in (Full Power) Pentode Mode, 30W RMS in (Half Power) Triode Mode » Two Channels: Channel 1 (LOUD) voiced for Crisp Cleans to Classic Rock and Heavy Blues tones (Drive, Level, Treble, Middle and Bass controls), Channel 2 (F'IN LOUD) voiced to capture Classic Crunch to Sweet Overdriven Lead tones (Gain, Level, Treble, Middle and Bass controls) » Master Controls (shared by both channels): Master Presence, Master Volume » Effects Loop: Tube Driven, shared by both channels, can be operated in Series or Parallel Mode » Effects Loop Bypass, which can also be used as a boost » Footswitch for Channel Selection and Effect Loop On/Off, with LEDs » Solid State Rectifier » DC Powered filaments (preamp) for solid, quiet operation » 16 gauge, 1.5mm rugged chassis construction with folded and welded corners » Outputs: 1 x 16 ohm jack, 2 x 8 ohm jacks, 2 x 4 ohm jacks » Ľ" Line Out » Cabinet made of 15 ply, 18mm void-free plywood construction

Subject to change without notice.

$649.99
Price includes UPS Ground Shipping
Coming Soon

Blackheart Engineering Amplification is about all tube, old-school amplifiers that are built like tanks and sound as good as amps costing multiple times the price. They look cool, they exude attitude and they don’t EVER compromise tone.

Pyotr Belov, whose own hand built amps have commanded thousands of dollars for over a decade, designs every amplifier in the infamous two-car garage. Pyotr’s Blackheart Engineering designs begin as handwired, point-to-point masterpieces tweaked until they sing like little glass and metal Gods. Every single component is selected to make the best amplifier tone and performance possible and then engineered to be manufactured in quantity so that every guitar player can access a great sounding, durable and sexy little tube amp.

Pyotr personally selects a very small number of qualifying offshore manufactures and stands over their shoulders to make sure that nothing gets lost in the translation. He specifies every tube, every component and approves everything one piece at a time, right down to the piping and tolex. It’s a very straightforward process that no other manufacture of high-end tube amps can say they undertake. That’s no surprise when you figure that Pyotr sometimes spends weeks away from home and out of the country teaching others how to handcraft amplifiers to his expectations.

The result? A truly boutique, sexy and amazing tube amplifier without the snobby price tag. Just as important is that the transaction is entertaining and the overall experience promotes brand passion and the desire to be included.

Click HERE for Return Policy. Questions? Call or e-mail us at steve@stevesmusiccenter.com.
Prices quoted are subject to change. Quantities are limited on some items.
If you plan to order more than one of this item, please contact us before ordering to verify availability.